Dynamic Plus

October 21

// SPARKLING WINES

CORK STOPPER //

Lafitte applies all its expertise and technology to the production of micro-agglomerated corks, which are manufactured using an individual molding system for the most demanding sparkling wines, ensuring an unparalleled organoleptic experience.

Made from the raw material used in the production of natural corks and discs. The quantity, quality, and elasticity of the raw material source ensure ideal mechanical performance for withstanding the pressures of sparkling wines.

In addition, the already balanced formulation contains food-grade microspheres (a chemically inert expanding agent), ensuring excellent physical and mechanical properties. The granules used in its production undergo our MaxClean process to ensure optimal organoleptic performance, preventing the cork from interfering with the sensory profile of the wine produced by the winery.

Technical Specifications

  
    Length
    Diameter
    Density
    Bezel
  
    48 ± 0.5
    30.5 ± 0.3
    275 ± 25
    NV ± 0.5
  
    mm
    mm
    Kg/m³
    mm

Length	Diameter	Density	Bezel
48 ± 0.5	30.5 ± 0.3	275 ± 25	NV ± 0.5
mm	mm	Kg/m³	mm

— Cork stoppers should be used no later than 6 months after shipment;
— Cork stoppers must be stored in:
> clean , well-ventilated, and odor-free;
> maintained at a temperature between 15°C and 25°C;
> with a relative humidity between 50% and 65% (at levels above 65%, there is a risk of irreversible microbial contamination).
— Use standard bottles;
— Regular inspection of the corking machine’s clamps, which must always be clean and prevented from rubbing against each other (as this causes indentations in the cork);
— The room temperature at the time of bottling must be between 15°C and 25°C;
— Vacuum-seal or CO₂-seal;
— Observe the recommended fill level for the bottles;
— Clean the equipment every day before and after bottling;
— Do not compress the plug to less than 2/3 of its diameter (this causes structural damage, poor recovery, and leaks);
— Insert the plugs to a depth of 24 mm ± 2 mm after placing the muzzle;
— Bottles should not be laid on their sides immediately after bottling. They must be kept upright for at least 3 minutes to allow the cork to regain its shape and ensure a secure seal;
— Storage and transportation of the product in accordance with regulatory standards.