0+2

June 27

// SPARKLING WINES

CORK STOPPER //

Lafitte applies all its knowledge and technology to the manufacture of a stopper composed of an agglomerated body and two natural discs for sparkling wines.

The combination of a body made from cork plate scraps used in the production of corks and two natural discs using food-grade glue allows for the production of an exclusive cork, maintaining its physical and mechanical properties. Available in various cosmetic qualities.

The granules used in its production undergo our MaxClean process to ensure that the cork's organoleptic behavior does not interfere with the wine's sensory profile.

Technical Information

  
   Length
    Diameter
    Density
  
    48 ± 0.5
    30.5 ± 0.3
    270 ± 40
  
    mm
    mm
    Kg/m³

Length	Diameter	Density
48 ± 0.5	30.5 ± 0.3	270 ± 40
mm	mm	Kg/m³

  
    Chamfer
    Discs
  
    NV ± 0.5
    10 ± 1
  
    mm
    mm

Chamfer	Discs
NV ± 0.5	10 ± 1
mm	mm

— Use of cork stoppers up to six months after shipment;
—Cork is sensitive to temperature, humidity, and odors, so corks should be stored in places that are:
> clean, well-ventilated, and odor-free;
> where the temperature remains between 15ºC and 25ºC;
> where the relative humidity is between 50% and 65% (if it exceeds 65%, there is a risk of irreversible microbiological change).
— Use standard bottles;
— Periodically check the corking machine jaws, which must be clean and free of scratches (which cause creases in the cork);
— The ambient temperature should be between 15ºC and 20ºC;
— Bottle under vacuum or with CO2;
— Respect the nominal filling level of the bottles;
— Clean the machines and wine pipes before and after bottling;
— Do not compress the cork below 2⁄3 of its diameter (this causes changes in structure, poor recovery, or leaks);
— Insert the cork to a depth of 24mm ± 2mm after placing the muselet; — Bottles should not be placed in a horizontal position immediately after bottling. They must remain in an upright position for at least 3 minutes;
— Store and transport the product in accordance with regulatory standards.